The Model 75 HP Hydrostatic carriage drive provides excellent carriage control and great adjustability. The drive is controlled by an electronic joystick which eliminates any hydraulic valves or hoses in the sawyer’s cab. A programmable pump control package allows the sawyer to easily set the feed rates in both directions to tune the drive for his individual preference.
The hydrostatic pump is very efficient and is only moving oil when needed. Like all Cleereman equipment, this feed is designed and built to be easy to maintain and provide years of trouble free operation.
This drive provides excellent control when used with small to midsized carriages.
Other Hydrostatic Drives
| Max Carriage Weight: | 9,000 lbs | |
| Cable Speed: | 750 feet per minute | |
| Cable Pull: | 5500 lbs | |
| Oil Capacity: | 100 gallons | |
| Pump Flow: | 58 GPM at 3500 PSI Max. | |
| Electric Motor: | 75 HPTEFC at 1800 RPM | |
| Drum Size: | 18″ Diameter, 3-7/16″ Diameter Shaft (Direct Drive) | |
| Cable Diameter: | 5/8″ or 3/4″ | |
| Cooling: | Air | |
| Remote Control: | Electric (Proportional) |
* Drive is complete except for oil and wire rope.
- Specifications & Dimensions
-
Max Carriage Weight: 9,000 lbs Cable Speed: 750 feet per minute Cable Pull: 5500 lbs Oil Capacity: 100 gallons Pump Flow: 58 GPM at 3500 PSI Max. Electric Motor: 75 HPTEFC at 1800 RPM Drum Size: 18″ Diameter, 3-7/16″ Diameter Shaft (Direct Drive) Cable Diameter: 5/8″ or 3/4″ Cooling: Air Remote Control: Electric (Proportional) * Drive is complete except for oil and wire rope.