The Cleereman Model LP380 linear positioning carriage has become a popular upgrade for set-shaft carriage owners. Quick, accurate knee control and smooth tapering will pay off immediately through increased production and yield.
Several options are available to meet your requirements for layout, production, log and cant turning, and maintenance.
Other Linear Positioning Carriages
- Built from heavy-duty, thick-wall structural steel components, precision welded and machined — Rigid, accurate
- Horizontal or Tilt Frame — Meets customer needs, easily integrated into existing systems
- Two to five headblocks set at customer specified spacing — Meets customer needs for log lengths and mixes
- The bunks are fabricated from 5/8” steel and utilize 5/8” alloy wear plates — Long-lasting, can be replaced to extend overall carriage life
- Knees are precision fabricated from 1” steel bases and 3/4” solid steel uprights – longer lasting, more durable
- Knees attach to bunks with a wrap-around mount for stability – extremely accurate lumber, high durability, less maintenance
- Adjustable, replaceable synthetic wear strips on the top, bottom, and sides of knee mounts – maintains perfect fit, easy maintenance, long life
- 5” stroke on dogs in and out position.
- T1 alloy steel tong-dogs — Holds log firmly in place for sure positioning – cuts down to a 1” backing board.
- Setworks Ready – Use the standard included PTJ setworks, or integrate it with any other setworks or optimization programs.
- Premium quality components – Hold up in extreme sawmill environments for precise, trouble free operation.
- 30 HP hydraulic power unit with 5 gallon accumulator, low and high pressure filters – smooth performance and recovery, increased production, low maintenance.
- Engineered to be simple and efficient – Minimal training time, easy and comfortable to control.
- OSHA approved air lock-out assembly — Increased employee safety
- Easy to access grease fittings, oversized oil cups — Easy maintenance
- Two, three, and four head block carriages available
- Any head block spacing available to meet customer’s specific requirements
- Custom built frames to meet elevation challenges
- Custom tilted frames
- Anti derailer
- Axles through the frame
- Custom Plastic wheels
- 1” Thick T1 dogs
- 14” wheels and 2 ¾” axles
- Brownsville turners
- Side mount turners
- On board Chain turners
- 3 Position face plates
- Cant push offs
- Board Push offs
- Double bit hammer dog
- Custom cable hook ups
- Dual cable equalizer systems
- Shot gun bracket
- Valve heaters
- Track and wheel cleaners
- Pressurized lube system for wheels and rail
- Automatic injection lube system for knees, wheels and rail
- Blow offs
- Nitride Process wear plates
- Chromed wear platesaxles centers to fit existing rail centers
- Custom wheel machining to match existing rail profile
- Extra wheel and axle assemblies
- Carriage Frame: 1/2″ wall 6″ x 6″ tube on front & 1/2″ wall 4″ x 6″ tube on back, welded into a one piece rigid frame for extreme durability and maximum strength
- Axles: 2 1/2″ Solid square with 58″ wheel centers
- Wheels: 12″ Steel with Timken tapered roller bearings
- Ratchet cable tightener on front end and cable hook-up on back end
- Heavy duty fabricated bunks with 5/8″ sides
- Long lasting Alloy steel wearplates 5/8″ thick
- Knees: 1″ base and 3/4″ upright with grease fittings installed for dog hinge pins
- Fully adjustable sandwich plate design uses replaceable wearstrips on top, sides and bottoms of wearplates to maintain a perfect fit
- 5″ Stroke in/out hydraulic cylinders and fully adjustable face plates to ensure perfect squareness
- Dogs out 5-5/8″, in 5/8″
- Dogs: 3/4″ thick, heat treated T1 Alloy steel for excellent log holding performance
- Automatic lubrication system on knees, bunks, wheels & rail
- High quality air cylinders & hydraulic LP cylinders designed for extreme sawmill environment
- Mac air valves used on dogging and turning functions
- 3″ Bore dog cylinders
- Wilkerson coalescing air filter & lubricator
- High pressure, 5 micron 280 filter to eliminate any contamination going to the positioning valves
- 5 gallon accumulator provides for unsurpassed smoothness & hydraulic recovery during knee movement
- Top quality Bosch hydraulic valves used to accurately position the knees
- Sawyers console and handles mounted on telescoping stand for easy installation
- Extremely high quality electrical cable between the console and the carriage for better flexibility, durability and longevity.
- OSHA required air lock-out assembly
- Features & Benefits
-
- Built from heavy-duty, thick-wall structural steel components, precision welded and machined — Rigid, accurate
- Horizontal or Tilt Frame — Meets customer needs, easily integrated into existing systems
- Two to five headblocks set at customer specified spacing — Meets customer needs for log lengths and mixes
- The bunks are fabricated from 5/8” steel and utilize 5/8” alloy wear plates — Long-lasting, can be replaced to extend overall carriage life
- Knees are precision fabricated from 1” steel bases and 3/4” solid steel uprights – longer lasting, more durable
- Knees attach to bunks with a wrap-around mount for stability – extremely accurate lumber, high durability, less maintenance
- Adjustable, replaceable synthetic wear strips on the top, bottom, and sides of knee mounts – maintains perfect fit, easy maintenance, long life
- 5” stroke on dogs in and out position.
- T1 alloy steel tong-dogs — Holds log firmly in place for sure positioning – cuts down to a 1” backing board.
- Setworks Ready – Use the standard included PTJ setworks, or integrate it with any other setworks or optimization programs.
- Premium quality components – Hold up in extreme sawmill environments for precise, trouble free operation.
- 30 HP hydraulic power unit with 5 gallon accumulator, low and high pressure filters – smooth performance and recovery, increased production, low maintenance.
- Engineered to be simple and efficient – Minimal training time, easy and comfortable to control.
- OSHA approved air lock-out assembly — Increased employee safety
- Easy to access grease fittings, oversized oil cups — Easy maintenance
- Options
-
- Two, three, and four head block carriages available
- Any head block spacing available to meet customer’s specific requirements
- Custom built frames to meet elevation challenges
- Custom tilted frames
- Anti derailer
- Axles through the frame
- Custom Plastic wheels
- 1” Thick T1 dogs
- 14” wheels and 2 ¾” axles
- Brownsville turners
- Side mount turners
- On board Chain turners
- 3 Position face plates
- Cant push offs
- Board Push offs
- Double bit hammer dog
- Custom cable hook ups
- Dual cable equalizer systems
- Shot gun bracket
- Valve heaters
- Track and wheel cleaners
- Pressurized lube system for wheels and rail
- Automatic injection lube system for knees, wheels and rail
- Blow offs
- Nitride Process wear plates
- Chromed wear platesaxles centers to fit existing rail centers
- Custom wheel machining to match existing rail profile
- Extra wheel and axle assemblies
- Specifications & Dimensions
-
- Carriage Frame: 1/2″ wall 6″ x 6″ tube on front & 1/2″ wall 4″ x 6″ tube on back, welded into a one piece rigid frame for extreme durability and maximum strength
- Axles: 2 1/2″ Solid square with 58″ wheel centers
- Wheels: 12″ Steel with Timken tapered roller bearings
- Ratchet cable tightener on front end and cable hook-up on back end
- Heavy duty fabricated bunks with 5/8″ sides
- Long lasting Alloy steel wearplates 5/8″ thick
- Knees: 1″ base and 3/4″ upright with grease fittings installed for dog hinge pins
- Fully adjustable sandwich plate design uses replaceable wearstrips on top, sides and bottoms of wearplates to maintain a perfect fit
- 5″ Stroke in/out hydraulic cylinders and fully adjustable face plates to ensure perfect squareness
- Dogs out 5-5/8″, in 5/8″
- Dogs: 3/4″ thick, heat treated T1 Alloy steel for excellent log holding performance
- Automatic lubrication system on knees, bunks, wheels & rail
- High quality air cylinders & hydraulic LP cylinders designed for extreme sawmill environment
- Mac air valves used on dogging and turning functions
- 3″ Bore dog cylinders
- Wilkerson coalescing air filter & lubricator
- High pressure, 5 micron 280 filter to eliminate any contamination going to the positioning valves
- 5 gallon accumulator provides for unsurpassed smoothness & hydraulic recovery during knee movement
- Top quality Bosch hydraulic valves used to accurately position the knees
- Sawyers console and handles mounted on telescoping stand for easy installation
- Extremely high quality electrical cable between the console and the carriage for better flexibility, durability and longevity.
- OSHA required air lock-out assembly